Alibaba Store
Tmall Store
Jingdong Sstore
Product parameters:
Instrument model: SPX-250BE
Power supply voltage: AC220V 50HZ
Temperature control range: 0-70 ° C
Refrigerant: R134a (fluorine free environmentally friendly refrigeration)
Specific ambient temperature: When the set temperature is less than 10 ℃, the ambient temperature should be less than 26 ℃
Input power: 800W
Tray layers: 8 layers
Tray size (mm): 485x515
Spacing (excluding tray height) (mm): 75
Working dimensions (depth x width x height) (mm): 500x550x900
Dimensions (Depth x Width x Height) (mm): 780x720x1560
Constant temperature mode: forced convection, heating and cooling balance, and heating and cooling switching dual selection
Performance:
Power supply: 220V 50HZ
Operating temperature range: 0-65 ° C (when the set operating temperature is below 10 ° C, the ambient temperature is below 26 ° C)
Temperature resolution: 0.1 ℃
Temperature fluctuation: ± 1 ℃ (balanced temperature control)
Temperature distribution accuracy: ± 2 ° C (at 37 ℃)
Structure:
Interior and exterior: interior: made of stainless steel plate; Externally: The surface of cold-rolled galvanized steel sheet is coated with antibiotic resistant coating
Thermal insulation material: flame retardant insulation board+polyurethane foam
Heater: Stainless steel electric heating tube
Compressor: Fully enclosed compressor
Defrosting function: manual defrosting (optional automatic defrosting)
BOD power supply: built-in or external
Lighting: Built in LED lighting
Disinfection lamp: built-in UV sterilization lamp (standard for mold incubator)
Test hole: one
Universal casters: 4 pieces
Number of partitions: 2 pieces
Partition load-bearing capacity:<15KG
controller:
Control methods: PID, adaptive control
Temperature display mode: LCD display
Temperature setting method: Touch the button to set
Time setting method: 0-9999 minutes
Operation functions: customized operation, scheduled operation, automatic stop
Additional functions: temperature deviation correction, menu locking, power outage memory
Program mode: Non programmable
Sensor: PT100
Safety device: Overtemperature alarm
Optional additional configurations: partition, R485 interface, printer, recorder, programmable temperature controller
*This product comes standard with two partitions, please communicate with customer service before placing an order to select the appropriate one
- Product Details
- Product manual
Yetuo SPX-250BE Biochemical Incubator
Model: SPX-250BE
Product Overview:
This product is suitable for experimental and production departments of scientific research institutions such as environmental protection, health and epidemic prevention, livestock, drug testing, and aquaculture. It is a specialized constant temperature equipment for water analysis and B0D determination of bacteria, molds, and microorganisms, cultivation, preservation, plant cultivation, and breeding experiments.
Product Features of Yetuo SPX-250BE Biochemical Incubator
Stainless steel workshop, with semi-circular transitions at the four corners, and shelves that can be freely installed and removed for easy cleaning and processing inside the workshop;
Geometric cavity clean design ensures active and perfect protection of samples;
The outer shell of the box is treated with electrostatic spraying technology, which has a beautiful and elegant appearance, and is corrosion-resistant and durable;
● Microcomputer control system, blue screen liquid display, touch sensitive operation buttons, easy to use and operate;
Using branded compressors and circulating fans, high efficiency, low consumption and energy saving;
● Install a limited temperature alarm system, self limit over temperature, automatic power-off and timing functions to ensure experimental safety;
The door is sealed with magnetic tape, which is easy to open and close with good sealing performance. It is equipped with tempered glass to prevent temperature loss;
