Alibaba Store
Tmall Store
Jingdong Sstore
Model: lhs-250sc
Volume: 250L
Refrigeration system: optional
Ambient temperature: 5 ~ 35 ° C
Temperature range: 0 ~ 60 ° C
Temperature resolution: 0.1 ° C
Temperature uniformity: ± 1 ° C
Temperature fluctuation: ± 0.5 ° C
Humidity control range: 50 ~ 95% RH
Humidity fluctuation: ± 5% ~ ± 8% RH
Power supply: 220V 50Hz
Inner tank size (mm): 530x480x1000
Overall dimension (mm): 630x700x1450
Timing range: 1-9999min
Load carrier: 3 (pieces) (standard configuration)
- Product Details
- Product manual
LHS series constant temperature and humidity incubator has an accurate temperature and humidity control system. It provides various environmental simulation conditions required for industrial research and biotechnology testing. It can be widely used in sterility tests such as drugs, textiles and food processing, stability inspection, raw material performance and product packaging life of industrial products.
Product features
1. Microcomputer liquid crystal temperature and humidity controller, accurate and reliable temperature and humidity control, with over temperature, electric leakage, power failure and sensor fault alarm functions;
2. Brand fluorine-free refrigeration compressor and circulating fan are adopted to force convective air circulation, with high efficiency, low energy consumption, low noise, uniform temperature distribution and long service life;
3. Mirror stainless steel liner, four corner semi-circular arc, easy to clean, and the shelf spacing in the box is adjustable;
4. High precision and large capacity humidity generator to ensure fast humidity control, high precision and small fluctuation;
5. An independent temperature limit alarm system is set to automatically interrupt when the temperature exceeds the limit, so as to ensure the safety of the experiment and avoid accidents (optional);
6. Configure RS-485 interface to record the changes of temperature and humidity parameters (optional);
7. The box door is equipped with an observation window, and the box is equipped with a lighting lamp to facilitate the observation of the culture in the box. It can also be equipped with a double door structure, and the inner door adopts a fully tempered glass door;
8. A test hole is provided on the left side of the box to facilitate experimental operation and temperature measurement (optional);
